UpComing Tradeshows

September 19-22, 2017
Process Expo 2017
Chicago, IL

November 12-18, 2017
AGRITECHNICA 2017
Hannover, Germany

November 22-24, 2017
CBST 2017
Shanghai, China

Back To Newsroom

Warner Electric ERS FENIX 09 Brakes for Theater Stage Lift System

One of the world’s largest and most prestigious stage equipment manufacturers needed a reliable braking solution for use on a series of stage lifts at a new theater. The lifts quickly raise and lower large, heavy podiums and scenery sets from beneath sections of the stage floor.

Typically, the high loads and speeds associated with this application would require large brakes which generate louder noise levels and have increased reaction times and stopping distances. However, application requirements specified redundant braking systems for static and emergency stops be installed on each lift section with no audible noise when braking.

To meet the challenge, Warner Electric supplied compact ERS FENIX 09 electrically-released brakes specifically designed for elevator/lift applications. Failsafe FENIX brakes provide redundant static and emergency stopping functionality in accordance with EN 81-1+A3. Two dual-function brakes were installed on each stage section lift drive for added redundancy.

FENIX 09 brakes feature dual magnets and discs, very low noise levels, fast response times, and low dynamic friction/torque tolerances. The modified standard FENIX 09 brake models supplied included high-energy friction linings typically used on heavy-duty industrial crane applications. Manual releases were also installed on all units.

Warner Electric engineers conducted application-specific tests to ensure that the brakes provided the required energy absorption capacity with sufficient reserves. The tests also confirmed that the proposed vertical installation posed no concerns and that very low braking noise was maintained over long operating times.

Warner Electric ERS FENIX 09 Brakes

Highlights

  • Redundant braking system in accordance with EN 81-1+A3
  • Two models supplied with 550 Nm and 700 Nm torque capacities
  • Low noise operation
  • Compact design
  • Dual magnets and discs
  • Manual releases included

Contact Information

Warner Electric
449 Gardner St.
South Beloit, IL 61080 - USA
Phone: 1-800-825-6544
Email: info@warnerelectric.com
www.warnerelectric.com

Warner Electric (France)
7 Rue de Champfleur
49182 St-Barthélémy d Anjou Cedex
France
Phone: +33 (0)2 41 21 24 24
Email: esales.warnerfr@warnerelectric-eu.com
www.warnerelectric.com